Recent Articles
- Rolling Page 61 24/06/2022
- Checking the finished fabric Page 60 13/06/2022
- The Airo Treatment Page 59 06/06/2022
- Brushing Page 58 26/05/2022
- Mercerization Page 57 25/05/2022
- Sodium plating and bleaching Pag. 56 20/05/2022
Mission and Vision
Looking for the best opportunities to satisfy the customer:
Info
Mobile Phone: +393319020189
Timetables
Working hours: 09.30 / 12.30 - 16.00 / 18.00 From Monday to Friday.
Purpose of processing
Dyeing process, with partial filling of the appliance, which foresees two circulation systems
of the fabric.
The first, with bath and fabric circulation, provides nozzles below or above the surface of the bath.
The second, for delicate and light fabrics, less powerful nozzles and circulation aided by a reel.
It is a pressurized device, with 1 or 6 strings, which allows the dyeing of polyester and fibers
synthetics in general, including wool blends.
Processing technology
We describe a modern machine with a controlled reel, for its completeness and variety
of use, which allows both the classic dyeing process and other operations.
The collateral air circuit allows to vary the system and speed of circulation of the piece
in the bathroom based on the heaviness and structure of the fabric and to operate in the bathroom only, in the air and in the bathroom
or with air only.
Process in the bathroom only (see figure A, path A blue):
the piece is introduced through the porthole (fig. A, point 1); then passes directly into the nozzle (fig. A, 2),
carried with the bath towards the bottom of the tub which functions as a relaxation chamber (fig. A, 3), passing by
rope above the driven reel (fig. A, 4), it is sewn with the next piece in a spin,
thus starting the cycle.
The bath is prepared in a tank (fig. A, 5) outside the machine, sucked by a pump
circulation (fig. A, 6) and introduced into the basket through the nozzle. Once the solution is finished, they are closed
the valves and the circulation of the bath begins, which continues from the bottom towards a filter, sucked by the
circulation pump and from this pushed into the nozzle.
Air-water process (fig. A, path A blue + B red):
same loading system; the flow of air increases the penetration of the dye bath
on the fibers and, by moving the fabric, it reduces the likelihood of creases or abrasions, especially
on delicate fabrics such as linen blends, lycra blends, etc.
Process with air only (fig. A, path B red):
it is used when dyeing is complete; the circuit is excluded by means of a suitable damper or valve
of the bath on the pressure nozzle, replaced by the fabric treatment circuit, engaged
on the air circuit and carried out with special auxiliary products. This process can only be performed on
some specially prepared machines.
Execution of the most recurrent machining and defects
Please refer to what is indicated for overflow dyeing (sheet 18).
Services
After the sale of the machinery we also assist you in logistics and if desired by the customer we have technicians capable of reassembling and starting the machinery.